
Similar Posts

LK1 Supersize 500 X500 Home Build Possible?
The mission of building a light strong 3d printed drone presented some challenges. Our build is doing well but refinments are always part of a continued development process. One of the areas i have wanted to improve is the blade guard assembly. Currently it is 6 parts glued together then secured to the body and

Hot end upgrade to extruder/hotend combo
The lk1 has been a very productive unit for our projects and we are still using the stock extruders and hotends. Maybe the hotends have been changed out but overall they are stock. The tubes get changed about every 40 hours but most of the time if there is an issue with the extrusion it’s

Blisked Fan design for small drone?
Yes, it is possible to create a 3D-printed blisked fan for a small drone, especially with advancements in additive manufacturing. However, the feasibility, performance, and practicality depend on several factors: Feasibility of 3D Printing a Blisked Fan Potential Performance Gains Challenges Estimated Value of the Design Summary Creating a 3D-printed blisked fan for a small
10 Tips for Converting a 3D Printer to Pellet Extrusion
In depth look at whats available for extruders, build types and installs.lots of information and research to help guide you through the buy or build process. The forum is building a hi-temp 3d printer that utilizes a pellet extruder built from plans and acquired parts. This article is also published as a forum topic here

219.00 American hard earned dollars for a large format 3d printer. Hell Yeah Boys
After 6 months with this printer I will give it a Hell Yeah! When you need a solution but dont have the unlimited resources of corporate america you have to take some chances. This was my chance at getting some large parts printed without spending crazy money. It almost seemed silly thinking it could work

Filament Temps
Filaments PLA Bed Temperature: 20 to 60°C Print Temperature: 200 to 220°C ABS Bed Temperature: 110°C Print Temperature: 220 to 265°C PETG Bed Temperature: 50 to 75°C Print Temperature: 240 to 270°C Nylon Bed Temperature: 80 to 100°C Print Temperature: 250°C ASA Bed Temperature: 80 to 100°C Print Temperature: 250°C Polycarbonate Bed Temperature: 100 to
One Comment
Leave a Reply Cancel reply
You must be logged in to post a comment.
THE FIX
https://forumla.us/community/3d-printer-tech/219-00-american-hard-earned-dollars-for-a-large-format-3d-printer-hell-yeah-boys/paged/2/#post-347