Similar Posts
3D Printing with Filaments: Health and Safety Questions to Ask
https://www.cdc.gov/niosh/docs/2020-115/pdfs/2020-115.pdf?id=10.26616/NIOSHPUB2020115
12 volts from Xbox PS
Power up any automotive accessory or twelve volt item with lots of AMPs.put the xbox brick to use for a quality power supply remove the plastic sheilding from a wire connector on one end to slide over the power socket pin then crimp wires on the other. The red wire is a crossover that tells…
Duet wifi cheat sheet
Probing-related G-code File config.g M584 X0 Y1 Z2:4 E3; two Z motors connected to driver outputs Z and E1 M671 X-20:220 Y0:0 S0.5 ; leadscrews at left (connected to Z) and right (connected to E1) of X axis M208 X-5:205 Y0:300 ; X carriage moves from -5 to 305, Y bed goes from 0 to…
learning the Latest Technology and Applying it
The goal of this new editor is to make adding rich content to WordPress simple and enjoyable. This whole post is composed of pieces of content—somewhat similar to LEGO bricks—that you can move around and interact with. Move your cursor around and you’ll notice the different blocks light up with outlines and arrows. Press the…
3d printer exhaust cover
I enjoy working with 3d printing but having accumulated several I figured it was time to setup an exhaust system for the plastic fumes. If you read about this topic you could reach the conclusion as I have it’s best to exhaust the air from the chamber. So I needed to build a chamber, first…
Townie Bike is Total Crap!
Ok so after a year it’s actually pretty awesome, you just have to take it apart and keep it maintained ship shape. The Chain, The Chain. Keep it clean and lubed Brand new Bike Issue number 4. Can you see the workmanship defect? Flat tire. Not a object from the road but a issue with…
