build
Similar Posts
Building 3d printed parts and using inserts
Hey. im looking at threaded inserts for a stealth press, the tool you make to do inserts. anyway the manual says insert m3x5x4. the inserts i have say m3x4x5. whats the spec here ChatGPT said: Hey! Good question — this comes up a lot with confusing spec formats for threaded inserts. Let’s break it down:…
Hot end upgrade to extruder/hotend combo
The lk1 has been a very productive unit for our projects and we are still using the stock extruders and hotends. Maybe the hotends have been changed out but overall they are stock. The tubes get changed about every 40 hours but most of the time if there is an issue with the extrusion it’s…
Pi4 Case print
Print Settings With our ender5 upgrade with a duet wifi its time we go to the next step Getting quality prints Because Microsoft as a corp. sucks we use Linux Mint as our OS , Cura works just great on this platformand it’s the same program no matter the operating system. There are many other…
Filament Temps
Filaments PLA Bed Temperature: 20 to 60°C Print Temperature: 200 to 220°C ABS Bed Temperature: 110°C Print Temperature: 220 to 265°C PETG Bed Temperature: 50 to 75°C Print Temperature: 240 to 270°C Nylon Bed Temperature: 80 to 100°C Print Temperature: 250°C ASA Bed Temperature: 80 to 100°C Print Temperature: 250°C Polycarbonate Bed Temperature: 100 to…